Help - Search - Members - Calendar
Full Version: FS: Engine Lid Trim Set
914World.com > The 914 Forums > Classified Forums > FS/WTB: 914 Parts
PCA7GGR
I have a couple of sets of nice factory original engine lid trim - 3 pieces (two short side & and a long one). $35 shipped CONUS - thanks
Click to view attachment
Click to view attachment
aturboman
PM Sent
PCA7GGR
One sold, one left available - thanks
DC_neun_vierzehn
I'll take the other set. Just realized the PO must have removed these from my lid at some point.
PCA7GGR
Both sets sold - thanks
PCA7GGR
Two more sets available - thanks
PCA7GGR
Sets available - thanks
Puebloswatcop
I'll take a set...pm Sent
PCA7GGR
I’ve got one more set available - thanks
PCA7GGR
Last set sold - thanks
PCA7GGR
I have another set available - thanks
TRP
Hello, are these the correct smaller size like the OEM ones and not the larger size sold my 914 Rubber? If these are OEM or the correct size/look as OEM, I will take the last set.

Ted
PCA7GGR
Sold - thanks
worn
QUOTE(TRP @ Jul 27 2026, 07:37 PM) *

Hello, are these the correct smaller size like the OEM ones and not the larger size sold my 914 Rubber? If these are OEM or the correct size/look as OEM, I will take the last set.

Ted

I know they sold, but what was the answer?
PCA7GGR
They are the original smaller ones from the fatherland. I take them off the few stock lids that still have them.
PCA7GGR
Another set available - thanks
morehills
I'll take them Sergio. Will send payment. John
PCA7GGR
Sold - Thanks
jim_hoyland
Can you post a side-by-side pic of the two; curious minds want to know.. smile.gif smile.gif smile.gif
PCA7GGR
"Can you post a side-by-side pic of the two"

Short answer: No

Long answer: In the 20+ yrs that I have made and sold close to 250 of my GT lids, I have not come across nor ever used the larger size sold by 914 Rubber. And of the close to 500 stock grills that I have used to make the GT lids, very few, maybe 5%ish, still had the stock trim still attached.

When they are is good shape and have no rust due to the inbedded metal insert, I have cleaned them up and sold them.

Attached is a pic of a stock trim.

Click to view attachment
PCA7GGR
More pics - note that on the pic of the trim in the vise, you can barely see the metal in the inside of the trim.
Click to view attachment
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2026 Invision Power Services, Inc.